Jet AFS-2000 Operating Instructions And Parts Manual page 9

Inner Filter: You must remove the two bolts (A,
Figure 5) that hold the cover in place. Remove
the cover. Remove the inner filter (A, Figure 6)
from the side of the cabinet. Replace the cover
and four bolts.
Accessory Filter: An additional electrostatic
filter can be added to this empty slot (B, Figure
6). Replace the cover and four bolts.
Diffuser: The diffuser (A, Figure 7) should not
need any maintenance. You can remove from
the side of the cabinet.
The filters should be replaced depending on the
amount of usage and the environment of your
shop. Clogged filters will reduce the amount of
air circulation.
Order replacement filters using the below listed
stock numbers.
330025 Air Diffuser
708722 Outer Filter (cardboard frame)
708723 Inner Filter
708724 Outer Filter (metal frame washable)
Figure 5
Figure 6
Figure 7
9