Jet AFS-2000 Operating Instructions And Parts Manual page 4

14. DON'T OVERREACH. Keep proper footing and balance at all times.
15. MAINTAIN TOOLS IN TOP CONDITION. Keep tools sharp and clean for best and safest
performance. Follow instructions for lubricating and changing accessories.
16. DISCONNECT TOOLS before servicing and when changing filters.
17. USE RECOMMENDED ACCESSORIES. The use of accessories and attachments not
recommended by manufacturer may cause hazards or risk of injury to persons.
18. AVOID ACCIDENTAL STARTING. Make sure switch is in "OFF" position before plugging in power
cord.
19. NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the fan blade is
accidentally contacted.
20. CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged
should be carefully checked to ensure that it will operate properly and perform its intended function-
check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A guard or other part that is damaged should be
properly repaired or replaced.
21. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don't leave tool until it
comes to a complete stop.
22. DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influence of drugs, alcohol
or any medication.
23. MAKE SURE TOOL IS DICONNECTED FROM POWER SUPPLY while motor is being mounted,
connected or reconnected.
24. WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
•
Lead from lead based paint
•
Crystalline silica from bricks and cement and other masonry products, and
•
Arsenic and chromium from chemically-treated lumber.
Your risk from those exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specifically designed to filter out microscopic particles.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious or even fatal
injury.
4