Twin Needle Sewing - Janome Horizon Memory craft 7700 QCP Instruction Book

v
x
b
n
m
1
z
c
2

Twin Needle Sewing

CAUTION:
Turn off the machine before changing the needle and
threading the machine.
When sewing with the twin needle, press the twin needle
key .
NOTES:
Use the zigzag foot A or satin stitch foot F.
Use #60 or finer threads.
Test the stitches before you begin to sew.
Threading the machine for twin needle
Raise the needle to the highest position and raise the
presser foot.
Attach the extra spool pin (refer to page 14).
Draw both threads from the spools and pass them
through the points from z to m.
Make sure that the two strands of thread do not get
tangled.
Pass one of the threads through the needle bar thread
guide on the left, and the other on the right.
1 Needle bar thread guide (left)
2 Needle bar thread guide (right)
Thread the needles from the front to back by hand.
NOTES:
Threading of points z to b is the same as for single
needle.
The needle threader cannot be used for the twin needle.
72