Touch Panel Calibration - Janome Horizon Memory craft 7700 QCP Instruction Book

z
x
c
v
b
b

Touch panel calibration

If the touch panel keys seem out of alignment, calibrate
the key position as follows.
z Press the center of the stitch width adjusting key with
the touch panel stylus.
x Press the center of the stitch length adjusting key with
the touch panel stylus.
c Press the center of the edit key with the touch panel
stylus.
v Press the "+" sign that appears on the LCD screen with
the touch panel stylus.
b Press the center of the D1S key with the touch panel
stylus.
n Press the "
" sign that appears on the LCD screen
with the touch panel stylus.
The new settings are registered.
To start over the calibration again press the confirm
button.
27