Correcting Distorted Stitch Patterns
The sewing results of the stretch patterns may vary
depending upon the sewing conditions, such as sewing
speed, type of fabric, number of layers etc.
q
Always test sew on a scrap piece of the fabric that you
wish to use.
If stretch patterns are distorted, correct them with the
feed balancing dial.
q Feed balancing dial
• Stretch stitch pattern (Example: stitch pattern 20
If the pattern is compressed, turn the feed balancing
dial in the direction of "+".
If the pattern is drawn out, turn the feed balancing dial
in the direction of "–".
• Stitch balance of buttonhole 26
If the right row is denser, turn the feed balancing dial
in the direction of "+".
If the left row is denser, turn the feed balancing dial in
the direction of "–".
• Evenness of tacking
If the stitch does not meet the start position, turn the
feed balancing dial in the direction of "+".
If the stitch does not meet the return position, turn the
feed balancing dial in the direction of "–".
60
)