Touch Panel; Lcd Display - Janome Sewing Machine Instruction Book

y
u
i
q w e
e r
w
q
t
r
t y

Touch Panel

q Mode key
When the power switch is turned on, the direct pattern
selection (mode 1) is set automatically.
Press the mode key to change the mode. Refer to
page 18.
w Clear key
Press the clear key to clear the memorized stitch
pattern.
Press and hold the clear key until the buzzer beeps to
clear all memorized stitch patterns. Refer to page 56.
e Flip key
Press the flip key to flip the selected stitch pattern
horizontally. Refer to page 52.
r Memory key
Press the memory key to memorize the selected
pattern. Refer to page 50.
t Number keys (Refer to page 18)
• Direct pattern selection
You can select the stitch patterns from 01 to 10
directly in mode 1 (direct pattern selection mode).
• Numeric pattern selection
Enter a 2-digit pattern number to select the desired
stitch pattern in mode 2 to 6.
y Stitch width adjustment key
Press "+" or "–" to change the stitch width. Refer to
pages 23 and 26.
u Stitch length adjustment key
Press "+" or "–" to change the stitch length. Refer to
pages 23 and 26.
i Cursor key
Press " " or " " to move the cursor to check or edit
the pattern combination. Refer to page 56.

LCD Display

The LCD display shows the following information when
the machine is turned on:
q Stitch pattern
w Mode
e Stitch pattern number
r Type of presser foot
t Stitch width
y Stitch length
8