Patchwork Piecing; Patchwork - Janome Horizon Instruction Book

q
e
q
q
e
r
w
r
q
w
q
w

Patchwork Piecing

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
• Patchwork piecing
Select pattern 8 (mode 1).
Place the patchwork pieces right sides together. Sew
while guiding the edge of the fabric along the guide on
the foot to keep a precise 1/4˝ seam allowance.
q Guide
w Right sides of the fabric
NOTE:
Use 1/4˝ seam foot O for the stitch pattern 8 in mode
1 and 02, 03 in mode 2.
Use Zigzag foot or Dual feed foot AD for stitch pattern
01.
• Angle scales on the needle plate
You can easily seam patchwork pieces at the desired
angle without marking, by using the angle scales on the
needle plate.
The angle scales are marked at 45, 60, 90 and 120
degrees.
Use the broken lines when piecing the patchwork pieces
with the 1/4˝ seam foot O as illustrated.
q Broken line

Patchwork

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
* Stitch patterns
be used.
• Patchwork
Open the seam flat with the right side up and sew
patchwork stitch along the seam line.
63
MODE 1: 8
MODE 3: 01, 02, 03
AUTO
1/4˝ seam foot O or
Zigzag foot A or
Dual feed foot AD
5
MODE 1: 9
MODE 3: 36
AUTO
Satin stitch foot F
5
(mode 3) can also