Dual Feed Foot - Janome Horizon Instruction Book

c
t
u
y
b
n
w
v
i
q
c Attach the dual feed foot holder to the presser bar.
Tighten the setscrew lightly with your finger.
t Dual feed link
y Dual feed foot holder
u Upper feed drive
i Dual feed foot
v Push the dual feed link to engage it with upper feed
drive.
b Lower the presser foot lifter. Lower the needle to the
lowest position by turning the handwheel.
n Tighten the setscrew securely with the screwdriver.
Replacing the dual feed foot
Pull the foot toward you to remove it.
Insert the pins of the foot into the slits of the foot holder
and gently push the foot until it snaps into place.
q Pin
w Slit
15