Quilting(Q); Using The Quilting Guide Bar; Q1-Q3 Patchwork Piecing; Angle Scales On The Needle Plate - Janome Skyline S7 Instruction Book

w
q
w
w
q
w
q
q
q
w
q

Quilting(Q)

Using the Quilting Guide Bar

The quilting guide bar is helpful when sewing parallel,
evenly spaced rows of stitches.
Insert the quilting guide bar into the hole in the back of
the foot holder. Slide the quilting guide bar and set it to
the desired spacing.
q Quilting guide bar
w Hole
Sew rows of stitches while tracing the previous row of
stitches with the quilting guide bar.

Q1-Q3 Patchwork Piecing

Patterns Q1 to Q3 are special stitches for seaming
patchwork pieces.
Patterns Q2 and Q3 are for patchwork piecing with 1/4˝
and 7 mm seam allowances respectively.
Use the 1/4˝ seam foot O.
Place the patchwork pieces right sides together. Sew
while guiding the edge of fabric along the guide.
q Guide
w Right side of the fabric

Angle Scales on the Needle Plate

You can easily seam patchwork pieces at the desired
angle without marking, by using the angle scales on the
needle plate.
The angle scales are marked at 45, 60, 90 and 120
degrees.
Use the broken lines when piecing the patchwork pieces
with the 1/4˝ seam foot O as illustrated.
q Broken line
NOTE:
Use the solid lines when piecing the patchwork pieces
with the zigzag foot A. Align the edge of the fabric to
the 1/4˝ seam guide line.
w Solid line
e 1/4˝ seam guide line

Q48-Q51 Hand-look quilt stitches

Patterns Q48 to Q51 are special stitches for quilting
which look like hand sewn stitches.
Use a transparent nylon thread for the needle and
ordinary sewing thread for the bobbin.
The bobbin thread is pulled up on the right side of the
fabric and the stitches look as if they were sewn by hand.
54