Removing And Attaching The Foot Holder; Dual Feed Foot - Janome Memory Craft 8900QCP Instruction Book

Janome 8900 Sewing Machine Instruction Manual
q
w
e
w
z
q
x
e
r
www.janomeflyer.com

Removing and Attaching the Foot Holder

Always make sure to press the lockout key to lockout
the machine or turn the power switch off before
replacing the presser foot.
Removing the foot holder
Raise the presser foot and loosen the setscrew.
Remove the foot holder.
Attaching the foot holder
Attach the foot holder to the presser bar from the rear.
q
Tighten the thumbscrew securely with the screwdriver.
Attach the needle after installation of the foot holder.
q Presser bar
w Foot holder
e Setscrew
NOTE:
Lower the presser foot when loosening and tightening
e
the thumbscrew if it is hard to access.

Dual Feed Foot

Always make sure to press the lockout key to lockout
the machine or turn the power switch off before
replacing the presser foot.
w
z Raise the needle to its highest position.
q Presser foot lifter
x Loosen the setscrew.
e Foot holder
r Setscrew
14
CAUTION:
CAUTION:
Raise the presser foot lifter.
w Needle
Remove the foot holder.
MC8900 Owners Manual/ User Guide