Janome Sewing Machine Instruction Book page 9

t
y
o
u
i
7
t t t t t Thread Cutter Button
Press this button to trim the threads after sewing.
To trim the threads automatically after the sewing, select
the desired stitch pattern, then press and hold the thread
cutter button until the thread cutter sign appears.
The machine will automatically stop and trim the threads
after locking stitches when the reverse or auto-lock button
is pressed.
The thread cutter sign i will blink while the machine cuts
the threads.
* Use the thread cutter on the face cover if the thread is
#30 or thicker.
* You can continue sewing without pulling the bobbin
thread up after trimming the threads.
y y y y y Cursor Buttons
Use these buttons to move the cursor o.
Press button to move the cursor to right.
Press button to move the cursor to left.
u u u u u Value Set Buttons
Use these buttons to change the set value.
Move the cursor under the digit you would like to change.
Press button to increase the value.
Press button to decrease the value.