Applique; Scallop Stitch - Janome Sewing Machine Instruction Book

q w e
q
e
y
q w
r
w
r
t
e

Applique

q Stitch pattern:
w Needle thread tension:
e Presser foot:
r Presser foot pressure dial:
* The stitch width of pattern 17 can be changed without
changing its center needle position.
* The stitch width of pattern 18 can be changed without
changing its left needle position.
Place an applique on the fabric and baste or pin it in
place.
Reduce the foot pressure.
Sew while guiding the fabric so the needle falls along the
outer edge of the applique.
q Applique
w Outer edge
• Adjusting the stitch width
Select pattern 17.
Press the cursor buttons
the stitch width value "3.5" e (default setting).
button to decrease the stitch width r.
Press the
button to increase the stitch width t.
Press the
The stitch width will be varied base on the centered
needle drop position y.
e Stitch width (3.5)
r Stitch pattern 17 (stitch width decreased)
t Stitch pattern 17 (stitch width increased)
y Center needle drop position

Scallop Stitch

q Stitch pattern:
w Thread tension dial:
e Presser foot:
Sew the stitches approximately 3/8˝ (1 cm) inside the
edge of the fabric.
Trim the outside of the stitches as shown. Make sure
you don't cut the thread.
38
17 or 18
1 to 4
Satin stitch foot F
3
to move the cursor under
41
3 to 6
Zigzag foot A