Installing On A Solaris Sip Server; Installing On A Web Server - HP Data Protector A.06.11 Integration Manual

Installing on a Solaris SIP server

1. Insert the Data Protector Solaris installation DVD.
2. As root, use pkgadd to install the following depot:
DP-SIP-SUN_A.06.11.pkg
3.
Select and install all the components.
4.
When the installation is complete, run the following setup script:
/opt/OV/SIP/dp_setup.sh
Follow the on-screen instructions. At the end of Data Protector Management
Server list, enter q or Q to quit.
5. Import the Customer Model, as described in
"Creating customer models and portal
6. Create users and user roles, as described in the SIP deployment and integration
guide.
7. Customize ConfigSpec.xml (see
8. Customize the communication between the web server (Apache) and the servlet
container (TOMCAT) as follows:
1. Edit the file /opt/OV/SIP/apache/conf/jk.conf
2. For SIP 3.1: Find the line:
JkMount /ovportal/* ajp12
3. For SIP 3.1: Add the following lines:
JkMount /dpreporter/* ajp12 JkMount /dpreporter ajp12
4. Stop and restart Apache and TOMCAT.

Installing on a web server

To install the Data Protector integration servlets on a web server, follow the steps in
this section appropriate for the operating system of the server.
If you install this integration on a web server, only the Java servlets are installed on
that server. The other components must be installed subsequently on the SIP server.
28 Installing the integration
views" on page 37.
"Editing ConfigSpec.xml" on page 33).