Protection Status Criteria; Editing Portalview.xml Directly; Data Protector Reports Module - HP Data Protector A.06.11 Integration Manual

Warning % At and Below:
Critical % At and Below:

Protection status criteria

Criteria for gauging protection status are pre-configured in this system, so you do
not need to configure these gauges. You can, however, configure thresholds for the
general protection status, or severity.
Protection status are generally defined as follows:
Normal
Minor
Critical
You can change thresholds for these statuses globally based on factors within your
unique environment. See

Editing PortalView.xml directly

You can edit PortalView.xml file directly. Take care; incorrect editing may cause
anomalous results in the integration. See the SIP deployment and integration guide
for details.

Data Protector reports module

The Reports module provides a variety of information from Data Protector on one or
more cell managers in your management domain.
The following reports are pre-configured for SIP:
Success percentage above which the protection status is
considered normal/successful. Status at or below are con-
sidered warning.
Success percentage at or below which the protection status
is considered to be critical.
Safe health range; severity and incidence of errors is acceptable.
Although there is probably no imminent danger of data loss from system
errors, the administrator should look into the situation.
Loss of data is probably imminent; the situation should be resolved immedi-
ately.
"Editing ConfigSpec.xml" on page 33 for details.
Integration guide for HP Service Information Portal 45