HP Neoview Messages Manual page 392

Error Number
0590
0593
0594
0595
0597
0632
0633
0634
0635
0638
0639
0700
0701
0702
0703
0704
0705
0706
0707
0708
0709
0711
0751
0757
0758
0759
0760
0761
0762
0763
392 File-System Errors
File-System Error Text
The parameter value is invalid or inconsistent with another.
The request was cancelled.
A tape-catalog error was returned to Tape Services. Refer to the event log for detailed information.
An error was returned to Tape Services. Refer to the event log for detailed information.
A required item is missing from an item list.
Not enough stack space to complete request.
Operation is invalid because a performance measurement utility is running.
A logical device number exceeded 16 bits.
A disk cannot be accessed because the other side is locked.
Process cannot be stopped until process returns to stopmode 1.
Process cannot be stopped until process goes to stopmode 0.
The sequence number of the message received by the Data Access Manager process from a recovery
process does not match.
The Data Access Manager process received a message from a recovery process that requires that
the Data Access Manager process be in the STARTED state; it is currently in the STOPPED state.
The Data Access Manager process received an erroneous message from a recovery process. The
message requested a physical REDO and also requested that a transaction log be generated.
The Data Access Manager process encountered a Creation Volume Sequence Number in a
transaction-log record sent by a recovery process that is more recent than the CRVSN of the File
Label.
The Data Access Manager process encountered a Previous Volume Sequence Number in a
transaction-log record sent by a recovery process that does not match the Volume Sequence
Number of the data block on disk.
Generated by the Data Access Manager process when it receives a Transaction Services Transaction
Log Disk request type message and the Data Access Manager process is not an transaction-log
disk.
Generated by the Data Access Manager process when it receives a request message that is
inappropriate for a Transaction Log Data Access Manager Process.
Generated by the Data Access Manager process when the Disk Process Name Stamp
(DPNameTimeStamp) in the message sent by a recovery process does not match the current
DPNameTimeStamp of the disk.
The Data Access Manager process encountered a File Label that had its UndoNeeded flag set
when a recovery request specified that the UndoNeeded flag must not be set.
The Data Access Manager process encountered a File Label that had its RedoNeeded flag set when
a recovery request specified that the RedoNeeded flag must not be set.
The Data Access Manager process received a corrupt transaction-log record in a message from a
recovery process.
A tape manager returned an error to Tape Services. Refer to the event log for detailed information.
A transaction typing mismatch occurred. A likely cause is that a READ ONLY transaction was in
effect when an INSERT, DELETE, or UPDATE or utility statement was executed within the same
transaction and the mismatch was not detected by the SQL compiler. See
File-System Errors for the Neoview Platform" (page
Unable to allocate space from the control block pool.
Unable to allocate space from the audit checkpoint pool.
Unable to allocate space for cache.
Unable to allocate space from the work pool.
Unable to allocate space for the free-space table.
Unable to allocate space from the local pool.
"New or Changed
398).