HP Neoview Messages Manual page 204

Recovery
SQL 8657
8657 Could not recover the specified object. Reason: $0~string0
$0~string0
Cause See the reason, $0~string0, to determine the cause.
Effect
The operation fails.
Recovery
SQL 8658
8658 Invalid ipAddr and/or portNum values returned after communication
with BDR Service process.
Cause
The IP address or port number in the replicate configuration table is wrong.
Effect The operation fails.
Recovery
SQL 8659
8659 BDR Listener process on $0~string0 received an error from CLI.
$0~string0
Cause Listener process received an error from CLI.
Effect
The operation fails.
Recovery
SQL 8660
8660 Could not read BDR configuration table.
Cause BDR processes cannot read from configuration table
manageability.replicate_schema.replicate_config.
Effect The operation fails.
Recovery
SQL 8661
8661 Specified target system $0~string0 does not exist, could not be
accessed, has not been registered in the configuration table or is the
same as the source system.
$0~string0
Cause
Target system is not registered correctly in configuration table or is not accessible.
Effect The operation fails.
Recovery
SQL 8662
8662 Target $0~string0 is not empty and purgedata option was not
specified.
$0~string0
Cause Target object is not empty.
Effect
The operation fails.
204 Executor Messages (8000 Through 8999)
Cleanup the environment and retry the query.
is the reason why replicate could not recover the object.
See the reason, $0~string0, to determine how to recover from the error.
Remove the bad records from the configuration table, and restart the BDR processes.
is the name of the system where listener was running.
Apply the recovery of the CLI error.
Check the environment (TMF, OSS), and retry the operation.
is the name of the target system.
Register target system and ensure the target system is accessible.
is the name of the target object.