Table of Contents
Advertisement
Error Number
File-System Error Text
0156
Tape command rejected.
0157
I/O process internal system error.
0160
Request is invalid for device state; protocol error.
0161
Impossible event occurred for line state.
0162
Operation timed out.
0163
EOT received or power at autocall unit is off.
0164
Disconnect received or data line is occupied (busy).
0165
RVI received or data line not occupied after setting call request.
0166
ENQ received or auto call unit failed to set present-next-digit.
0167
EOT received on line bid, or data-set-status not set
0168
NAK received on line bid, or auto-call unit failed to clear present-next-digit after digit-present
was set.
0169
WACK received on line bid, auto-call unit set abandon-call-and-retry, or station disabled or
undefined.
0170
No ID sequence received during circuit assurance mode or invalid message control word entry
number on write.
0171
No response received on bid/poll/select, or reply invalid.
0172
Reply not proper for protocol; invalid control sequence or invalid data.
0173
Maximum allowable NAKs received (transmission error), invalid message control word on WRITE,
or invalid request ID.
0174
WACK received or bus frame aborted.
0175
Incorrect alternating ACK received, or command rejected.
0176
Poll sequence ended with no responder.
0177
Text overrun (insufficient buffer space for data transfer).
0178
No address list specified.
0179
Application buffer is incorrect, control request pending, or autopoll active.
0180
Unknown device status received.
0181
Sub device expected status information but received data instead.
0187
Operation returning with no useful data.
0188
Damage to logical flow of events.
0189
Response not yet available.
0190
Device error; hardware problem.
0191
Device power on, or terminal reset.
0192
Device in diagnose mode; system operator running diagnostics.
0193
Invalid or missing microcode file.
0194
Device use or mount request rejected by operator.
0195
Operation requires use of Tape Services but it is not running; tape operation is not allowed.
0196
A tape label record is missing or incorrect.
0197
An SQL error has occurred.
0198
A DEFINE of the given name could not be found.
0199
The disk file is protected by security software.
0200
The device is owned by an alternate port.
389
Advertisement
Table of Contents
