Displaying A Job; Using The Break Key - HP Guardian User Manual

Managing Your Spooler Jobs Using Peruse

Displaying a Job

There are three ways to display the current spooler job using Peruse:
Use the LIST command.
Press Return to display one line. Press and hold down Return to scroll the job until
you release the key.
Use function keys to list groups of lines from the job. The number of lines listed by
each function key is shown below:
Key
F1
F2
F3
F4

Using the Break Key

You can use the Break key in Peruse as follows:
If Peruse is waiting for a command, pressing Break wakes the TACL program and
displays the TACL prompt. If you enter the PAUSE command at the TACL prompt,
Peruse regains control of your terminal and displays its prompt. If you enter the
STOP command at the TACL prompt, the TACL program stops the Peruse process
(provided Peruse was the last process you started).
If Peruse is listing lines from a job, pressing Break stops the listing and redisplays
the Peruse prompt (_).
If the STATUS command is executing, pressing Break stops its execution and
redisplays the Peruse prompt (_).
Lines Key Lines
2 F5 32
4 F6 64
8 F7 128
16 F8 256
Guardian User's Guide —425266-001
Key Lines
F9 512
F10 1024
F11 2048
F12 4096
13- 5
Displaying a Job
Key Lines
F13 8132
F14 16384
F15 32768
F16 65536