Displaying Current Print Device Attributes - HP Guardian User Manual

Managing the Spooler Using Spoolcom
Device attribute subcommands are described in
2. Establish the connection between the location and the device:
) LOC [ #group. ] dest, DEV $device
3. Bring the device online:
) DEV $device, START
The total number of devices including this one must not exceed the maximum
configured at the time of spooler coldstart, and the number of locations cannot
exceed that maximum.
Example
To add a device named $LP3 to the spooler and cause all jobs printed on that device to
have a standard header page, enter:
> SPOOLCOM
) DEV $LP3, PROCESS $XP, HEADER ON
) LOC #LINE.DEFAULT, DEV $LP3
) DEV $LP3, START

Displaying Current Print Device Attributes

To display the current attributes of a print device, enter:
) DEV $device-name, STATUS DETAIL
Example
To display the current attributes of the device named $LP, enter:
) DEV $LP, STATUS DETAIL
Guardian User's Guide —425266-001
15 -12
Displaying Current Print Device Attributes
Table 15-5 on page 15-15.