Mapping half-height blades
The following table lists the available configurations for half-height devices installed in device bay N (1–8)
Connection
Embedded NIC
Mezzanine slot 1—1x or
2x cards (4x cards are not
supported in this slot)
Port number
Connects to
interconnect bay/port
NIC 1
1/Port N
NIC 2
1/Port N+8
1x/2x port 1
2/Port N
1x/2x port 2
2/Port N+8
Comments
One single-wide Ethernet
interconnect module
•
One single-wide
interconnect module
•
Only two ports will be
connected.
•
Four port cards will only
connect the first two ports.
Installing components 44