Removal And Replacement Of Water Valve - Hoshizaki DCM-240BAF Service Manual

7. REMOVAL AND REPLACEMENT OF WATER VALVE

1) Turn off the power supply and unplug the dispenser.
2) Close the Water Supply Line Shut-off Valve.
3) Remove the Drain Cap and drain out.
4) Remove the panels.
5) Remove the valve outlet tubing by releasing the Clamp.
6) Remove the Fitting Nut and the Water Valve.
7) Install the new Water Valve.
8) Assemble the removed parts in the reverse order of which they were removed.
9) Open the Water Supply Line Shut-off Valve.
10) Turn on the power supply.
11) Check for water leaks.
12) Replace the panels in their correct positions.
13) Plug in the dispenser and turn on the power supply.
34
A2AAA0269806