Hoshizaki DCM-240BAF Service Manual page 47

4) Move the Ice Making Switch to the "FLUSH" position.
5) Wipe the Bin Liner and the Drip Plate using a clean cloth containing the sanitizing solution.
6) Pour clean warm water carefully onto the Bin Liner and into the Reservoir through the opening
in the center of the Storage Bin to melt the ice and rinse out the sanitizing solution. Be
careful not to wet the Bin Control Switch on the Storage Bin Cover.
7) Immerse the parts rinsed in [a] step 18) in the sanitizing solution.
8) Rinse the sanitized parts with water.
9) Place the rinsed parts in position.
10) Move the Ice Making Switch to the "ON" position, open the Water Supply Line Shut-off Valve
and start the icemaking process. Run the ice dispenser for about 30 minutes.
11) Move the Ice Making Switch to the "FLUSH" position.
12) Press the Push Button, and remove all ice from the Storage Bin.
13) Place the Top Panel in position.
14) Move the Ice Making Switch to the "ON" position.
A2AAA0269806
47