Haier HDY-D70 User Manual page 8

Installation
If the direction of the dryer's door is not suitable for the location, its opening
direction may be changed. The procedure is as follows:
1. Unscrew the 4 hinge screws holding the door onto the machine and
2. Unscrew the door catch and prise out the catch cover on the opposite
3. Unscrew the door hinges and prise out the hinge covers on the opposite
4. Remove the 4 blanking plugs from the screw holes on the machine and
5. Refit the door on the opposite side of the machine.
d
6
remove the door.
side of the door and transpose them.
side of the door and transpose them.
insert them in the holes on the other side.
a
b
c
e
a = door hinge
b = catch cover
c = door
d = hinge cover
e = door catch
f = blanking plug
f