Using Your Appliance - Haier HDY-D70 User Manual

Using your appliance

1. Turning on power
2. load laundry
3. setting the drying programme
4. selecting additional functions
5. programme operation
6. programme completion
7. Turning off the dryer
12
Insert the power plug into an appropriate wall socket and turn on the
power. Operating power supply: (220-240)V/50Hz.
Open the door and place the laundry into the drum of the appliance.
To save energy and achieve better drying performance, please spin the
laundry as dry as possible beforehand. Place items evenly into the drum
after shaking them.
Reference weight of fabrics for drying:
• Overalls
(cotton approx. 950g)
• Blended fabric clothes
• Woollen blankets
• Socks
(blended fabrics approx. 50g)
• Jackets
(cotton approx. 800g)
• Single bed sheets
Note: Do not overfill the appliance - it can cause damage to the appliance
and to items inside.
Turn the programme selection dial to set optimum drying programme
according to the laundry type and the drying result required.
Select additional functions as required:
- Start Delay,- Delicate,- Anti-crease,- Signal Off.
After a programme is set, touch the Start/Pause button to start the
programme.
Before the drying programme ends, the dryer will enter the cool air
cycle. After the programme is complete, the display screen will display
"End". Open the door to remove the laundry. If the laundry is not
removed after the drying programme is complete, the dryer will start the
anti-crease cycle automatically. In the anti-crease cycle, the dryer's drum
will run at a set interval to keep your laundry from creasing.
Press the power button to switch off the power supply and then turn off
the dryer at the wall socket.
(approx. 800g)
(approx. 3000g)
(cotton approx. 800g)
• T-shirt
(approx. 300g)
• Underwear
(approx. 70g)
• Jeans
(approx. 800g)
• Shirts
(approx. 300g)
• Pyjamas
(approx. 200g)