Table of Contents
Advertisement
About your LED LCD TV
Preparing your
remote control
Installing the batteries
A
Place the remote control face down, then open the
cover of the battery compartment.
1
B
Install two AAA batteries. (The + and - symbols on
the batteries must match the marks on the remote).
2
C
Close the cover of the battery compartment.
3
Battery caution
Ensure that there is nothing between the remote control
and the remote sensor of the TV set.
Sunlight, or other strong light, will interfere with the
signal from the remote control. Avoid using near
fluorescent lights or neon signs.
Do not place the remote control in direct heat or in a
damp place as you may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery
types. Install the batteries according to the correct
EN-11 LED Backlit Flat TV Instruction Manual
polarities. Do not use rechargeable batteries. If your TV is
going to be stored for a long period of time, remove the
batteries from the remote control.
Do not dispose of the batteries with standard household
waste. Do not throw them in a fire. Dispose of the
battery according to local regulations.
Getting started
Setting up
Location
You need to place your TV near to your plug socket (so
the power cable can comfortably reach) and within
reach of your aerial socket or extension lead.
Connection
A
Insert your TV aerial lead into the Antenna input at
the side of the TV.
B
Insert the batteries into the remote control. Make
sure they are inserted the right way around,
matching the polarity as indicated inside the battery
compartment.
Switching your TV on
A
POWER button in the bottom right-hand
Press the
corner of the TV once. An indicator light will appear
in the left of the screen.
B
Pre
ss POWER on the remote control. The TV will turn
on.
This may take a few moments.
C
When prompted, select your chosen language
from the list that will appear on-screen. Use the
button to scroll to the language you want and press
the OK button to confirm.
D
Select the usage mode; either Shop mode or Home
mode.
E
Select your country.
F
Set the initial password for your TV. If the country
you selected is France, the password cannot be set
as 0000.
Advertisement
Table of Contents
