Preparation Of Your Remote Control; Gettingstarted; Battery Installation; Setting Up - Haier LET19T3CW Instruction Manual

Digital led lcd television
Table of Contents

Advertisement

Prepartion of your
remote control

Battery installation

A
Place the remote control face down, then open the
cover of the battery compartment.
B
Install two AAA batteries. (The + and - symbol of
the battery must match with the marks on the
remote).
C
Close the cover of the battery compartment.
Battery caution
Confirm there is no object between the remote control
and the remote sensor of the TV set.
Sunshine or other strong light will interfere with the
signal sent by the remote control. In this situation turn
the TV set to avoid the direct light source.
Do not put the remote control in direct heat or in a
damp place as you may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery
types. Install the batteries at the correct polarities.
Do not use rechargeable batteries. If your TV is to be
stored for a period of time, remove the batteries from
the remote control.
Digital LED LCD Television Instruction Manual
03

GettingStarted

Setting up

Location
You will need to place your TV near your plug socket (so the
power cable can comfortably reach) and within reach of your
aerial socket or extension lead.
Connection
A
Insert your TV aerial lead into the Antenna input at the
side of the TV.
B
Insert the batteries into the remote control. Make sure
they are inserted the right way around, matching the
polarity as indicated inside the battery compartment.
Switching your TV on
A
POWER button on the right side of the TV
Press the
once. A red flashing light will appear in the corner of the
screen.
B
POWER on the remote control. The TV will turn
Press
on and the red light will turn blue. This may take a few
moments.
C
Select your chosen language when prompted from the
list that will appear on screen. Use the34 button to
scroll to the language you want and press OK button to
confirm.
TUNING YOUR TV
Switching to an external source other
that TV
If you have attached a DVD player or similar external device
to the TV, you will need to tell the TV to display the content
from it. Simply press SOURCE which will bring up the source
P.09

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Let19t3cwwLet22t3cwLet22t3cww

Table of Contents