DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 12 2009. Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive over the air digital programming, but should continue to work as before for other purposes (e.g., for watching low-power TV stations still broadcasting in analog, watching pre-recorded movies, or playing video...
SYMBOL DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This device complies with Part 15 of FCC Rules. Operation of this product is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PRECAUTIONS AND REMINDERS Place unit on even surfaces. Unplug immediately if there is a malfunction like no picture, no video/audio, smoke and bad odor from Don't throw any object inside the TV box like metals or other flammable materials. Don't place the TV in confined spaces or in a box when using it.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
19. CONSUMER ALERT – This television receiver has only an analog broadcast tuner and will require a converter box after June 12 2009, to receive over-the-air broadcasts with an antenna because of the Nation's transition to digital broadcasting. Analog-only TVs should continue to work as before with cable and satellite TV services, gaming consoles, VCRs, DVD players, and similar products, For more information, call the Federal Communications Commission at 1-888-225-5322 (TTY: 1-888-835-5322)or visit the Commission's digital television website at: www.DTV.
23. Outdoor Antenna Grounding – If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code, ANSI/NFPA No.
ENERGY STAR compliant By being ENERGY STAR compliant you are assured that your Haier model is helping the environment by using less energy while saving you money. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy promoting energy efficiency.
TABLE OF CONTENTS DIGITAL TELEVISION TRANSITION NOTICE ... 1 FOR YOUR SAFETY ... 3 PRECAUTIONS AND REMINDERS ... 4 IMPORTANT SAFETY INSTRUCTIONS ... 5 PREPARATION ... 10 ATTACHING THE BASE ...10 PREPARING YOUR LCD HDTV FOR WALL MOUNTING ...10 PERIPHERAL CONNECTION GUIDE ... 12 OPERATING INSTRUCTIONS ...
PREPARATION IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. ATTACHING THE BASE IMPORTANT: The base of the HDTV must be assembled prior to usage. 1.
Please make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! 1. Install the base stand; place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air.
PERIPHERAL CONNECTION GUIDE • HDMI – Connect the primary source for digital video such as a DVD player, Blu-ray player, or set top box through this all digital connector. • VGA/AUDIO IN – Connect the video and audio cables from a computer here.
OPERATING INSTRUCTIONS TO USE THE FRONT PANEL CONTROLS The front panel controls are touch keys. Simply touch the icon with your finger. • Power on/off (standby) the TV set. • Menu displayed: Navigate up. • Menu not displayed: Browse the TV channels. •...
TO USE THE REMOTE CONTROL Power Press to power ON/OFF (standby) TV. Note: The TV is never completely powered off unless physically unplugged. TV, DVD, STB, CABLE, VCR, AUD Select one of the system modes in which the remote control can be used. PICTURE Press to change the picture mode: Standard, Eco, Movie, Personal, Vivid.
▲ ▼ ◄ ►: To navigate the on-screen menus and adjust the system settings. ENTER Press to confirm a selection. SLEEP Press to set the sleep timer: (off / 5 / 10 / 15 / 30 / 60 / 90 / 120 / 180 / 240 mins). The TV will automatically turn off (standby mode) after selected period of time passes.
TO USE THE MENUS 1. Press the Menu button to display or close the main menu. 2. Use the Navigation Ring to move around to select, adjust or confirm an item in the OSD (On Screen Display) menu. Press the Menu button to enter the main OSD.
5. Color: Video color chroma adjustment, the tuning range is 0 ~ 100. 6. Tint: Video tint adjustment, the tuning range is R50 ~ G50. 7. Color Temp.: Three color temperature modes. (Cool / Normal / Warm) 8. Noise Reduction: Gives four NR effect degrees: Low, Mid, High and Off.
the TV speaker is off. The default setting is On. 9. AVL: Turn the Auto Volume Leveler On or Off. When AVL is on, the TV will maintain a steady volume during commercials or when the channel is changed. 10. Preset: Restores all audio settings to the factory default value.
TV Rating table. After exiting the main menu, the parental control function is enabled. The blocked channels or source signals can be unlocked by entering the password. Note: This feature is only available in TV or Composite source mode. (The default password is: 『 0 0 0 0 』...
Automatic, Red, Green, Blue, Yellow, Magenta, Cyan, Black, White. 9. HDMI CEC: This option is available only for HDMI source mode. Your Haier HDTV supports some HDMI CEC (Consumer Electronic Control) functions. When you connect another HDMI CEC device (ex. Blu-ray player) to the TV, they can discover and communicate with each other.
Multimedia List 1. JPEG Viewer 2. MP3 MusicBox Exit (2) Select MultiMedia Menu in the Setup Menu to choose the JPEG Viewer or MP3 MusicBox. These two items are activated only if a USB storage device is plugged into the USB port. MultiMedia Menu Video Digital Captions...
(On) or disable (Off) the mute screen function. When enabled, the screen mute warning banner would be displayed on screen after 5 seconds if no key is pressed. Once the screen mute warning banner is displayed, click "Yes" to start muting screen or click "No"...
Please ensure you dispose of your old receiver according to local regulations. Haier is committed to safely recycling electronic products and product materials. Please check for a local recycling location in the United States at : 1800RECYCLING.COM or call...
PRODUCT SPECIFICATIONS NOTE • This model complies with the specifications listed below. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future. Model No.
Model No. • • • Side Connectors • • Dimensions with Stand (W x H x D) Dimensions without Stand (W x H x D) Weight with Stand Weight without Stand and Base VESA-compatible wall bracket (W x H) Screw type Power Consumption Standby Mains Power...
TROUBLESHOOTING Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow “Ghost”...
GLOSSARY HDTV HDTV displays are technically defined as being capable of displaying a minimum of 720p or 1080i active scan lines. HDMI Inputs High-Definition Multimedia Interface Audio / Video Inputs Located on the rear of the receiver, these connectors (RCA phono type plug) are used for the input of audio and video signals.
Haier be liable, or in any way responsible for incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not apply to you.