Time Setup - Haier Backlit Instruction Manual

Press thebutton to select the item that needs
adjusting.
Press the  button to adjust the selected item.
When you are happy with your choice, press the
EXIT button to return to normal viewing or press the
MENU button to return to the previous menu.
OSD language
❖
To select the menu language.
DPMS
❖
In PC mode, the TV will automatically enter standby mode
if no PC input signal is detected after 3 minutes. The
set will turn on and automatically enter PC mode
when the PC input is connected.
Blue screen
❖
This will select the background colour.
Note
The blue screen function is only available in ATV
❏
mode.
Shop mode
❖
Press the  button to select On/Off.
Screen mode
❖
To set the picture proportions, press the  button
to select 4:3/16:9/auto/wide/zoom1/zoom2. You can
quickly select the desired mode using the SCREEN
button on the remote control.
4:3 mode
•
Choose 4:3 when you want to view a picture in an
original 4:3 aspect ratio with grey bars appearing
down both the left and right sides.
• 16:9 mode
Choose 16:9 when you want to adjust the picture
horizontally, in a linear proportion, to fill the entire
screen.
Auto
•
Choose Auto when you want to view the original
picture aspect ratio.
Wide
•
Choose Wide when you want to adjust the picture
in a non-linear proportion. That is, larger at the top
sides and with no alteration on the bottom side.
Zoom1
•
Choose Zoom1 when you want to view the picture
without any alteration. Note that the top and
bottom portions of the picture will be cropped.
Zoom2
•
Choose Zoom2 when you want the picture to be
altered by being both vertically extended and
cropped. The picture will be a trade off between
alteration and screen coverage.
Overscan
❖
This function is only active and visible in
the menu when the signal is ELA timing
(480i/480p/720p/1080i/1080p) in the RGB colour
space in the HDMI/DVI input.
OSD timeout
❖
To set how long you want the menus to appear
on-screen. Press the  button repeatedly to select
the number of preset seconds. The time will be set in
the following sequence: off, 10sec, 15sec, 30sec, 45sec
and 60sec.
Teletext language
❖
To set the Teletext mode.
Subtitles
❖
To show subtitles for the video currently playing on
the TV.

Time setup

❖
OSD Language
Time
Picture
DPMS
Time Mode
Blue Screen
Sound Clock
Date
Shop Mode
Off Time
Tuning
Screen Mode
On Time
Overscan
Sleep Timer
OSD Timeout
Time Zone
Function
Subtitle
Auto Power Down(4h)
Lock
Time mode
•
Press the  button to select Auto or Manual.
When Auto is selected, the time cannot be adjusted.
When Manual is selected, you can set the time
manually.
LED Backlit Flat TV Instruction Manual EN-18
Getting started
En
Off
Off
Auto
02:05
OFF Off
2011/01/01
Off
Off
Auto
Off
＞＞
Off
None
On
Back Move Enter
Back