Child lock
❖
Press the 34 button to
Tuning lock
❖
Press the 34 button to
switched on, some operations such as search will
be not available.) When you enter the tuning menu,
tuner lock will be on the screen. If you want to use the
tuning menu, you need to enter the lock menu to set
the tuner lock to off or select Clear lock.
Source set
❖
Source set is used for setting up preset channels.
Press the OK button to enter the sub-menu. Press the
5 button to select off, TV, SCART, component, PC,
HDMI1, HDMI2, HDMI3 and HDMI4 in turn.
C
hannel no.
❖
Channel no. controls the channel number when you
turn on the TV.
Source lock
❖
Source lock will control the source when you turn on
the TV.
Press the OK button to enter the sub-menu.
5 button to set the source lock.
If you press the SOURCE button when the source lock
switched to on, the TV can switch to a corresponding
source and will display that the Source is locked.
Max. volume
❖
Press the 34button to adjust from 0 –100. If a certain
value is set, when the volume is adjusted, the sound
value cannot exceed the maximum volume value. If
the current volume is higher the maximum volume,
when the lock set menu is set, the current volume
will become the set maximum volume. If the current
volume is below the maximum volume, the volume
set by the user will remain unchanged.
Initial volume mode
❖
Press the 34 button to select Off/On. The TV will
store this information, and the next time the TV is
switched on, it will be at this volume.
Initial volume
❖
The TV will store the setting, andwill be the volume
when the TV is next turned on.
Parental lock
❖
Press the OK button to enter the sub-menu.
5 button to select OFF or 3 – 18 to limit the age of
children who will watch TV.
select
Off/On.
select
Off/On. (When
Press the
Press the
Channel lock
❖
Press the 5 button to select the channel you want
to lock.
Clear lock
❖
Press the 5 button to select clear lock mode.
Press the OK button to unlock all set modes This will
set all
lock options to off and the maximum volume
will return to 100.
Shortcut menu
display
Subtitle function
❖
Pressing the SUBTITLE button on the remote control
will set the subtitle function to On or Off.
Note
Pressing the SUBTITLE button on the remote will
❏
only display the subtitle languages menu in DTV
mode.
CH.LIST function
❖
A
CH.LIST button on the remote
Pressing the
control will display the channel list menu.
B
Press the red/green button to select from satellite,
digital or analogue in tuner mode.
C
Press the yellow button to select from satellite or
digital in the select list. You can press the 5
button to select video/radio/data/all.
D
Press the
button to page up or page down.
34
E
Press the blue button to select the satellite list.
GUIDE function
❖
Press the GUIDE button on the remote control
to display the programme guide menu. Press the
534 button to select the programme.
You can press the EXIT button to cancel the changes
at any time.
LED Backlit Flat TV Instruction Manual EN-22
Getting started
En