Quantum Atlas 10K II 9.2/18.4/36.7/73.4 GB Product Manual page 164

MODE SELECT (6) Command (15h) (continued)
Table 5–43 Quantum-Unique Page — Field Descriptions (continued)
Field
ESL
IMR
IOE
ArcsOn
DlyESP
Force10
DEWG
Enable Comm Timeout
MaxSkip
Vendor Specific
Minimum Block Threshold
Quantum Atlas 10K II Ultra160/m SCSI Hard Disk Drives
Default Description
0 Enable Save Log. When set = 1, saving and loading of non-
SMART pages to/from the MCS area is enabled.
0 Infinite Message Retry. When set = 1, the number of retries at
a message error is infinite.
1 Individual ORCA Profile Enabled. When set = 0, this feature is
disabled.
0 Arcs always on.
0 Delay ESP. For ESP (anticipatory-READ) commands only, when
set = 1 the delay from data phase to the first REQ of data is
increased from about 2 s to about 16 s.
0 When this bit = 0, the disk drive may negotiate for a transfer
period less than 19h.
When this bit = 1, SDTR transfer period is limited to 19h
minimum.
1 Disable ESP WRITE Guess. When = 1, enables this feature.
0 Enable Command Timeout. When = 1, enables this feature.
5 The value of this field specifies the number of times that a host
request can be skipped over (such as when performing
queuing optimizations). This parameter affects only queued
commands. Some host operating systems support tagged
command queuing which allows for multiple requests to be
resident in the disk drive simultaneously. The disk drive can
then re-order execution of the requests to improve throughput.
For systems in which minimum completion time of a request is
more important than throughput, MaxSkip can be reduced.
Values allowed range from 0 to 255.
--- Proprietary Information
1 This field specifies the minimum number of blocks ready
before starting data transfer.
SCSI Description
(continued)
5–97