Precor 904 Owner's Manual page 11

Diagram 7
Installing the right handrail and
T-knob assembly.
Micro-adjustment cable
Handrail (right)
T-knob
Handrail mount
Leather pad
Rod
Side rail mount
Safety stop
Diagram 8
Inserting the locking pin.
Running belt
Locking pin
T-knob
Wire loop
Handrail mount
Side rail mount
c. Insert the rod into the side rail mount and apply pressure to push the
T-knob assembly through to the opposite side. See Diagram 7. You
may need to jiggle the rod slightly to help alleviate friction and to
align the rod in the opposite side rail mount.
Note: Take your time and be patient while installing the rod between
the two handrails. The tight fit assures smooth handrail operation.
d. Rest the right handrail on the safety stop.
e. Remove the locking pin (D) from the hardware kit and place the wire
loop over the T-knob. Align the hole in the handrail mount with the
side rail mount and insert the locking pin. See Diagram 8.
page 11