Interfaces And Connectors; External Ports - Fujitsu D1451 Technical Manual

Interfaces and connectors

The positions of the interfaces and connectors are shown on page "Cover".
The components and connectors marked are not necessarily present on the mainboard.

External ports

The positions of the external ports are shown on page "Cover".
PS/2 keyboard port, purple
Serial interface, turquoise
LAN
LAN connector
Audio output (Line out), light green
Audio input (Line in), light blue
LAN connector
This mainboard is equipped with the 82562ET (D1521) or the 82562EM (D1522) LAN controller.
Both LAN controller support transfer speeds of 10 Mbit/s and 100 Mbit/s. The LAN controller are
equipped with a 3 KB transmission and receiving buffer (FIFO) and support WOL function through
Magic Packetä.
It is also possible to boot a device without its own boot hard disk via LAN. Here bootix® LAN BootP
or bootix® PXE are supported.
The LAN RJ45 connector has two LEDs (light emitting diodes).
2
A26361-D1451-Z120-1-6319
1 = a connection exists (e.g. to a hub).
2 = Link Mode: the LAN connection is active.
1
PS/2 mouse port, green
Parallel port/Printer, burgundy
USB - Universal Serial Bus, black
Microphone jack (mono), pink
VGA port, blue (monitor)
External ports
English - 7