Power Management Setup - Fujitsu GA-8I848PM P4 Titan Series User Manual

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
ACPI Suspend Type
Power LED in S1 state
Off by Power button
PME Event Wake Up
ModemRingOn/WakeOnLan
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
Power On by Mouse
Power On by Keyboard
x KB Power ON Password
AC Back Function
: Move Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1. (Default value)
S3(STR) Set ACPI suspend type to S3.
Power LED in S1 state
Blinking In standby mode(S1), power LED will blink. (Default value)
Dual/OFF In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
Off by Power button
Instant-off
Delay 4 Sec.
PME Event Wake Up
Disabled
Enabled
ModemRingOn/WakeOnLAN
An incoming call via modem can awake the system from any suspend state or an input signal
comes from the other client server on the LAN can awake the system from any suspend state.
Disabled
Enabled
Power Management Setup
[S1(POS)]
[Blinking]
[Instant-off]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
[Disabled]
Enter
[Soft-Off]
+/-/PU/PD: Value
F6: Fail-Save Default
Press power button then Power off instantly. (Default value)
Press power button 4 sec. to Power off. Enter suspend if button is pressed
less than 4 sec.
Disable this function.
Enable PME Event Wake up. (Default value)
Disable Modem Ring on/wake on Lan function.
Enable Modem Ring on/wake on Lan. (Default value)
- 37 -
Menu Level
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
BIOS Setup