Fujitsu GA-8I848PM P4 Titan Series User Manual page 5

On-Board LAN
On-Board Sound
PS/2 Connector
BIOS
Additional Features
Overclocking
"**" HT functionality requirement content :
Enabling the functionality of Hyper-Threading Technology for your computer system requires all
of the following platform components:
- CPU: An Intel ® Pentium 4 Processor with HT Technology
- Chipset: An Intel
- BIOS: A BIOS that supports HT Technology and has it enabled
- OS: An operation system that has optimizations for HT Technology
Please set the CPU host frequency in accordance with your processor's specifications.
We don't recommend you to set the system bus frequency over the CPU's specification because
these specific bus frequencies are not the standard specifications for CPU, chipset and most of the
peripherals. Whether your system can run under these specific bus frequencies properly will
depend on your hardware configurations, including CPU, Chipsets, Memory, Cards...etc.
RealTek RTL8100C (10/100 Mbit)
1 RJ45 port
Realtek ALC655 CODEC
Support Jack-Sensing
Line Out / 2 front speaker
Line In / 2 rear speaker(by s/w switch)
Mic In / center& subwoofer(by s/w switch)
SPDIF Out
CD_In / AUX_In
PS/2 Keyboard interface and PS/2 Mouse interface
Licensed Award BIOS
Supports Q-Flash
PS/2 Keyboard power on by password
PS/2 Mouse power on
STR (Suspend-To-RAM)
AC Recovery
Poly fuse for keyboard over-current protection
USB KB/Mouse wake up from S3
Supports @BIOS
Supports EasyTune 4
Over Clock (DDR/AGP/CPU/PCI) by BIOS
Chipset that supports HT Technology
®
- 5 - Introduction