Friedrich SS08M10 Service & Parts Manual page 17

Standard chassis models kuhl
Table of Contents

Advertisement

TIMER OR SCHEDULE OPTIONS 1 OR 2 SELECTION
The control system has one Timer and two Schedule functions:
Timer (factory default) - Allows you to command the unit to turn
A.
ON and OFF at a time you program. Setting the start, stop and day
can be found latter in this manual on page 18.
Residential Schedule - When selection #1 is selected, the unit
B.
follows a pre-programmed set of operational parameters that
covers 5 days of the week with 4 time windows during each day.
Each time window has it's own set of 8 operating parameters.
Refer to Addendum 1.
Commercial Schedule - When selection #2 is selected, the unit
C.
follows a pre-programmed set of operational parameters that
covers 7 days of the week with 2 time windows during each day.
Each time window has it's own set of 8 operating parameters.
Refer to Addendum 1.
To change the TIMER/SCHEDULE selection, press and hold the
button for 3 sec, then let go.
The display shows the TIMER is selected. Press the
let go.
The display shows option 1 (Residential Schedule) is selected. Press
the
button once and let go.
The display shows option 2 (Commercial Schedule) is selected.
To save and exit selection, press the TIMER SET button (Figure 4, Page
18).
16
TIMER
SCHEDULE
FRR139
button once and
SCHEDULE
FRR137
SCHEDULE
FRR138
AUTO FAN
The display reverts to the normal display.
NOTE: The schedule options 1 and 2 have factory pre-programmed
settings which can only be changed by using the WiFi FriedrichLink™
adaptor (an accessory). With it, you can create your own custom
schedule program. See page 10 for more information.
NOTE: Once you have selected the TIMER
we must first set the following before turning it on.
1. Set time and day
2. Set start time
3. Set stop time
See timer settings on next page.
To Turn On the Timer or Schedule Selected
Press the
button and let go. The system will operate in the mode
TIMER
SCHEDULE
option (1, 2 or Timer) you selected. At the above image, TIMER is selected
and turned on.
F
SET POINT
FRR136
or SCHEDULE
FRR139

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents