Extreme Networks Summit WM Technical Reference Manual page 161

Table 34: SECURITY_MANAGER (4) logs and events (Continued)
Log ID Log Message
21 Client with MAC%s cannot be
authorized on%s with
filterName%s. The filterName
is invalid on this%s
Client with MAC%s cannot be
authorized with filterName%s
as this filterName is invalid on
the%s with id%d
Client with MAC%s cannot be
authorized due to filter
problems. Unable to resolve
problem: failing MAC-based
authorization request from
client
Minor
33 Error trying to delete all
session tracking tags (token
mappings). As this only
happens at shutdown, the
memory will be released
anyway.
34 Connect socket call failed. Will
not be able to communicate
with specific component.
35 Client connected to BSSID:%s.
36 Client with MAC%s has failed
authorization on AP <%s>.
37 Client session MAC%s has
failed authentication
Info
65 Socket write failed. The TCP
connection is down. The
authentication request will fail
for the session, however the
secMgr will try to re-connect to
the "downed" component.
66 Socket read failed with
errno%d. The TCP connection
is down. The authentication
request will fail for the
session, however the secMgr
will try to re-connect to the
"downed" component.
67 Error trying to close all
sockets. However, they will
time out on their own.
Summit WM Technical Reference Guide, Software Version 5.1
Comment
No system impact but may
indicate internal logic error in
resource cleanup.
Internal operation failure. May
result in exhausting system
memory resources.
n/a
Client on specific AP has
failed authentication with
controller.
Client on specific AP has
failed authentication with
controller
Possible outage in user
authentication subsystem. User
will most likely re-attempt to
clear situation.
Possible outage in user
authentication subsystem. User
will most likely re-attempt to
clear situation.
No negative impact to system.
However indicates possible
issue with resource de-
allocation.
Action
Validate Configuration of
RadiusServer. Validate that
matches WM-AD configuration.
If problem persists contact
Technical Support for
assistance.
Validate Configuration of
RadiusServer. Validate that
matches WM-AD configuration.
If problem persists contact
Technical Support for
assistance.
Mapping issue for per-user
radius assigned policy. User
will be assigned default.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
None
Verify that user in question is
properly configured to access
network.
Verify that user in question is
properly configured to access
network.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
161