Ru_Sesmgr_Id (65) - Extreme Networks Summit WM Technical Reference Manual

Table 48: RADIUS_ACCOUNTING (64) logs and events (Continued)
Log ID Log Message
9 No Response from one
RADIUS accounting server:%s.
Trace
129 %s

RU_SESMGR_ID (65)

Table 49: RU_SESMGR_ID (65) logs and events
Log ID Log Message
Major
9 Loss of active mobility tunnel
with Peer%s detected. Please
verify reachability. System will
reattempt connection.
Minor
33 Successfully established
mobility tunnel with peer%s.
34 Mobility tunnel with Peer%s
reset due to membership
credentials change.
35 Mobility tunnels with Peers
reset due to membership
credentials change on current
controller.
Summit WM Technical Reference Guide, Software Version 5.1
Comment
Possible issue with
configuration of CDR/
Accounting sub-system. Can
result in lack of accounting
reporting/CDR for system
users. Doesn't affect users
state, however, it doesn't allow
owner to provide proper billing
for services rendered. If
backup/alternate servers were
defined system will attempt to
connect to them.
Comment
Possible Feature Impact. Some
possible user impact as tunnel
change purges sessions
associated with peer. Users if
connected will need to re-
authenticate and renegotiate
topology profile.
Inter-AC Mobility State
Inter-AC Mobility State.
Administrator changed mobility
domain membership list.
Inter-AC Mobility State.
Administrator changed mobility
domain membership list.
Action
Validate configuration of CDR/
Accounting settings for Radius
Server and WM-AD definitions.
If problem persists contact
Technical Support to
investigate.
Action
Determine if outage was
caused by configuration
change to Mobility feature
(add/Remove of controllers
from Mobility Domain).
Determine if outage was
caused by network path
interruption. If interruption was
caused by failure of Mobility
controller, please review log
file to determine appropriate
root cause and corresponding
action.
None
None
None
201