Extreme Networks Summit WM Technical Reference Manual page 197

Table 46: REMOTE_INS (58) logs and events (Continued)
Log ID Log Message
In
run_analysis_against_specific_li
st: cleanup_memory_for_data
for THIRD_PAP failed.
In
run_analysis_against_specific_li
st: cleanup_memory_for_data
for FRIENDLY_AP failed.
Unable to cleanup memory for
AP information. Memory leak
may occur
Unable to cleanup memory for
3rd party information. Memory
leak may occur
Unable to cleanup memory for
friendly AP party information.
Memory leak may occur
Unable to cleanup memory for
RF Data Collector connection
information. Memory leak may
occur
Unable to cleanup memory for
Scan group information.
Memory leak may occur
Cannot change scan parameters
or list of APs when scan is in
progress. Scan update failed.
Unable to determine time when
scan results received from
RFDC. Cannot process results
and will have to drop them.
Info
65 Sending Scan Request with
req_id zero
Received RFDC Shutdown
notify message for RFDC
session with ip addr%s
Received RFDC Shutdown
notify message for RFDC
session (id =%d)
Received request from CM to
delete RFDC session (id =%d).
Cannot process this request.
Received request from CM to
delete RFDC session with ip
addr%s
Connection with RFDC session
with ip addr%s is up
Summit WM Technical Reference Guide, Software Version 5.1
Comment
Internal operation issue. May
result in problems with memory
management for the system.
Internal operation issue. May
result in problems with memory
management for the system.
Internal operation issue. May
result in problems with memory
management for the system.
Internal operation issue. May
result in problems with memory
management for the system.
Internal operation issue. May
result in problems with memory
management for the system.
Internal operation issue. May
result in problems with memory
management for the system.
Internal operation issue. May
result in problems with memory
management for the system.
Operational error. Operator
can't change parameters for a
running scan. Scan must first
be stopped and then modified.
Internal operational issue. May
result in failure to identify
possible threat.
Summit WM series Spy feature
state
Summit WM series Spy feature
state
Summit WM series Spy feature
state. Explicit shutdown
indicates result of
administrative action (Disable
feature/Role, system shutdown)
Internal operating issue.
Possible configuration
mismatch. Deletion however
should have no impact on
running detection scans.
Summit WM series Spy feature
state
Summit WM series Spy feature
state
Action
If problem persists Contact
Technical Support for
investigation.
If problem persists Contact
Technical Support for
investigation.
If problem persists Contact
Technical Support for
investigation.
If problem persists Contact
Technical Support for
investigation.
If problem persists Contact
Technical Support for
investigation.
If problem persists Contact
Technical Support for
investigation.
If problem persists Contact
Technical Support for
investigation.
None
If problem persists Contact
Technical Support for
investigation.
None
None
None
If problem persists Contact
Technical Support for
investigation.
None
None
197