Wan - Planet XRT-401D User Manual

3.2 WAN

Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and
you would like to change your Internet connection type. The WAN Settings screen allows you to
specify the type of WAN port connect you want to establish with your ISP. In the XRT-D's WAN.
The WAN settings offer the following selections for the router's WAN port, Dynamic IP, Static IP,
PPPoE, PPTP, L2TP, Telstra Big Pond, Qos, Policy, DNS and DDNS. You have to select one
of the two WAN ports first and configure one WAN port at a time.
Parameters
3.2.1 Dynamic IP
3.2.2 Static IP address
3.2.3 PPPoE
3.2.4 PPTP
3.2.5 L2TP
3.2.6 Telstra Big Pond
3.2.7 Policy
3.2.8 QoS
3.2.9 DNS
Description
Your ISP will automatically give you an IP address
Your ISP has given you an IP address already
Your ISP requires PPPoE connection.
Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection.
Your ISP requires L2TP connection.
Your ISP requires Telstra Big Pond connection.
You can configure WAN policy. (XRT-402D/104D)
You can specify rules for bandwidth control. (XRT-
402D/104D)
You can specify a DNS server that you wish to use
27