Table of Contents
Advertisement
8.4. Display Log Graph
Point logs are properties inside the controller that
have been graphed. The Display Log Graph screen
will open and show a graph view of the data.
Figure 8-15 - Display Log Graph Menu from Navigation Tree
Once you have selected the points you wish to log
and have clicked the Display Log Graph button, or
clicked on the Display Log Graph menu from the
point on the navigation tree, the logged points will be
shown in a graph as shown in Figure 8-20.
8.4.1. Graphing Range
When Display Log Graph is clicked, a pop-up
graph will open. Set graph parameters by choosing
the time range for the graph to show. Scroll down and
choose an option from the Show drop-down to select
a date and time range. The default is 4 hours (so 4
hours of logs in either Site Time or My Time will dis-
play) and is indicated along the bottom of the graph.
Date and time are indicated inside the red box on the
cross hairs. Left-click and drag on the graph to zoom
in. Click once to zoom back out.
If Range is selected next to the Show drop-down,
start and end times can be entered into the Start and
End fields and selected from the calendars next to
them.
Display Log Graph
Save your chosen graph parameters or your cus-
tom date range as your default by clicking the Time
Range Option button,
the Display Log Graph screen, these defaults will ap-
ply.
Figure 8-16 - Setting up Graphing Range
8.4.2. Site Time or My Time
The graph can be specified based on Site Time or
My Time. Select the Site Time option to show log in-
formation for a date/time in the time zone associated
with each particular site that has points you are dis-
playing. For every site that has points to be displayed,
those points are converted to that particular site's time
zone. Select the My Time option to show log infor-
mation for a date/time for the time zone as set in your
Windows setup independent of any site's time zone.
Figure 8-17 - Site Time or My Time
Date and time are indicated inside the red box on
the cross hairs.
Left-click and drag on the graph to zoom in.
Mouse over the value(s) to the right of the graph to see
reference information (tree level, controller, applica-
tion, and point information) about that value.
Click on the Excel icon
to an Excel spreadsheet. Left-click and drag inside the
graph to zoom in. Click once to zoom back out.
so that each time you open
to download log data
Points • 83
Advertisement
Table of Contents
