Graph Log Points While Viewing A Gs Screen - Emerson Site Manager User Manual

ton to cancel. Click List Power Builder to open the
List Power Builder window where you can manage
your lists with a variety of Power Builder controls.
Figure 8-11 - Watch Or Graph Point Page
8.3.1. Graph Log Points While
Viewing a GS Screen
Using the Graph Collection menu, you can select
points that have logs from any GS Screen, add them
in a collection, and have them graphed. To include a
point in the collection, while viewing a GS Screen (at
RUN mode), right-click on an active point, hover the
cursor over Graph Collection, and click Add Point.
You can select up to 10 points and add them in your
collection. (The Graph Collection option will be dis-
abled for points that are inactive).
Figure 8-12 - Graph Collection Menu
82 • Site Manager User Manual
When all the desired points have been added in the
collection, click Display Collection from the Graph
Collection menu. A new window will launch and dis-
play the graph of the points. Refer to Section 8.4.,
Display Log Graph for navigation of graphs.
Figure 8-13 - Display Collection
Click Remove Point to remove a point from the
collection, or Remove All Points to delete the collec-
tion.
Figure 8-14 - Display Collection
NOTE: The graph will be blank if the point
that was graphed has no record of logs in the
database. To display the graph of the point, run
the Retrieve Logs activity first and run another
Display Log Graph.
026-1012 Rev 3 06-DEC-2011