Edit Application Instance - Emerson Site Manager User Manual

controller and the navigation tree in Site Manager.
Click OK to delete the application instance, Cancel
to stop.
Figure 4-21 - Delete Application Instance Menu
Pop-up message:
Figure 4-22 - Delete Application Instance Message
A progress window will confirm that the Applica-
tion Instance has been deleted:
Figure 4-23 - Application Instance Deleted

4.5.4. Edit Application Instance

To make changes to an application instance,
choose Edit Application Instance in the navigation
tree (right-click the desired application). Edit Appli-
cation will be used to change setpoints in an applica-
tion, and set up Advisory Configuration and Log
Configuration in an online controller.
Unit
To open the Edit Application page, right-click the
desired application instance from the navigation tree,
and select Edit Application Instance.
Figure 4-24 - Edit Application Instance Page
The Edit Application page allows you to perform
online remote editing of applications and shows the
editable and non-editable point values (or protocol
component) of an application instance, which are di-
vided into groups set by the controller. (Figure 4-25
shows an example of an Edit Application page of a
Suction Group.)
Figure 4-25 - Edit Application Instance Page
Navigation Tree • 45