Table of Contents
Advertisement
4.4.1. Control System Properties
If Control System Properties is clicked from the
navigation tree, the Control System Properties page
opens displaying the units, all activities associated
with that control system, configurables, and details
about the control system.
Figure 4-13 - Control System Properties Page
Each control system has a properties page. It dis-
plays all the information that is related to a control
system, including sub-directories, activities to per-
form, and configuration information.
Under each Control System, there will be 0 or
more Units of that control system type such as Rack
A or HVAC. (Site Manager will allow a tree with
more than one control system of the same type in each
site).
The available units will be loaded once the user
clicks on the plus sign next to the control system to be
opened.
You may also right-click on the control system in
the navigation tree and select Refresh Units from the
navigation tree.
• Units: All units that have been set up for this control
system.
• Activities: Lists any activities that may be per-
formed on the control system.
• Activity Configuration: Activities that can be con-
figured at the control system level can also be ac-
cessed from this page.
• System Configuration: Opens the Activity History
42 • Site Manager User Manual
- Results page for the chosen control system and its
entities. Firmware can be managed from this section
(see Section 5.1., Firmware Package Manage-
ment).
• Details: Connection specifics.
4.4.2. Delete Control System
To delete a control system, select Delete Control
System from the Control System Tasks fly-out
menu in the navigation tree, or go to the Site Config-
uration page.
A message window will open and ask if you want
to delete the control system. Click OK to delete, Can-
cel to exit.
Figure 4-14 - Delete Control System
4.4.3. Edit/Configure Control
System
To make changes to a control system, click Edit
Control System from the desired control system's
mouse-over/right-click menu in the navigation tree.
The Control System Configuration page opens:
Figure 4-15 - Control System Configuration Page
• Enter a name for the control system in the Name
026-1012 Rev 3 06-DEC-2011
Advertisement
Table of Contents
