Terminal Mode Keys (E2 Controller Type Shown); Obtain Controller Information - Emerson Site Manager User Manual

4.6.2.1. Terminal Mode Keys (E2 Controller
Type Shown)
The keys listed in Table 4-3 can be found under-
neath the terminal mode screens for an E2 and will
vary depending on the controller type you are using.
Keystrokes are sent directly to the controller, which
gives you control right from your desktop as if you
were using the keypad on the controller.
Function
Key
for RX
Suction
Group
Condensers
Standard
and Case
Circuits
Sensor Con-
trol and
Power Mon-
itoring
Setup
Help key:
Opens the
online help
Alarm key:
Opens the
Advisory
Log where
alarms can
be viewed
Home key:
Opens the
E2 Home
screen
Menu key:
Opens the
Main Menu
screen
Table 4-3 - Front Panel Function Keys For an E2
50 • Site Manager User Manual
Function Function
for BX for CX
AHU AHU
Zones Lighting
Lighting Circuits
Sensors Sensors
Setup Setup
Help key: Help key:
Opens the Opens the
online help online help
Alarm key: Alarm key:
Opens the Opens the
Advisory Advisory
Log where Log where
alarms can alarms can
be viewed be viewed
Home key: Home key:
Opens the Opens the
E2 Home E2 Home
screen
screen
Menu key: Menu key:
Opens the Opens the
Main Menu Main Menu
screen screen
Function
Key
for RX
Back key:
Takes the
user back to
the previous
screen
Log In/Out
key: Opens
the User
Login
screen. Logs
off the user
if currently
logged into
the system
Disconnect
key: Closes
the terminal
mode
screen.
Table 4-3 - Front Panel Function Keys For an E2
Clicking Print on the top right corner of the termi-
nal mode screen will print the current screen.

4.6.3. Obtain Controller Information

The Obtain Controller Information activity con-
nects to a given Control System, refreshes the Unit
list, refreshes the Application List for each Unit, and
refreshes the points for any Application Instances that
have "out of date" points, which means the point list
will be retrieved for any applications that have never
had a point list retrieved, and also for any applications
that have changed since the last time the point list in-
formation was checked. Obtain Controller Informa-
tion can be scheduled, see "Scheduling Obtain
Controller Information" on page 30. for scheduling
setup.
Obtain Controller Information will need to be run
(or equivalent operation) for Site Manager to display
the current information in the controller and synchro-
nize the updates from the controller configuration
and the GS Screen. Note that if the configuration of
the controller changes while a GS Screen is being
viewed, the system will not pick up configuration
changes between the time the application data inven-
tory is being received.
Function Function
for BX for CX
Back key: Back key:
Takes the Takes the
user back to user back to
the previous the previous
screen screen
Log In/Out Log In/Out
key: Opens key: Opens
the User the User
Login Login
screen. Logs screen. Logs
off the user off the user
if currently if currently
logged into logged into
the system the system
Disconnect Disconnect
key: Closes key: Closes
the terminal the terminal
mode mode
screen. screen.
026-1012 Rev 3 06-DEC-2011