Frequency/Voltage Control - ECS G31T-M7 Manual

Frequency/Voltage Control

This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have in-
stalled in your system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Manufacturer : Intel
Ratio Actual Value: 7
CPU Frequency :
CPU Over-clocking Func.:
Auto Detect DIMM/PCI CIK
Spread Spectrum
: Move Enter : Select
F1:General Help
Manufacturer (Intel)
This item displays the information of current manufacturer of the CPU installed in
your computer.
Ratio Actual Value (7)
These items show the Locked ratio status and the actual ratio of the CPU installed in
your system.
CPU Frequency (333MHz)
This item indicates the current CPU frequency. Users can not make any change to
this item. Please noted that the frequency will be varied with different CPU.
CPU Over-clocking Func. (Disabled)
This item decides the CPU over-clocking function installed in yoursystem. If the
over-clocking fails, please turn off the system power. And then, hold the PageUp key
(similar to the Clear CMOS function) and turn on the power, the BIOS will recover
the safe default.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Press <Esc> to return to the main menu setting page.
Frequency/Voltage Control
333MHz
Disabled
Enabled
Enabled
+/-/: Value F10: Save ESC: Exit
F9: Load Default Settings
Using BIOS
Help item
Options
Disabled
Enabled
39