Changing The Pip Position; Changing The Pip Size; Swapping The Main And Pip Sources - Planar PD520 Owner's Operating Manual

Changing the PIP Position

Changing the PIP Size

Swapping the Main and
PIP Sources
To change the PIP window position, press the
➤
POSITION ( ) button on the remote control
repeatedly until the window is in the desired
position. (You cannot change the secondary
window position when in side-by-side PIP mode.)
3
4
To change the PIP window size, press the SIZE
➤
( ) button on the remote control repeatedly
to achieve the desired window size.
To swap the main and PIP sources, press the
➤
SWAP button on the remote control.
2
1
42 Planar PD520 Owner's Operating Manual