Ir Remote Sensor And Power Status Indicator; Mounting In Portrait Position - Planar Simplicity Series User Manual

Ventilation Requirements for enclosure locating
To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.
1.5.

IR remote sensor and power status indicator

1. For optimal IR remote control performance, pull out the retractable lens from the backside of the display. The LED power status light is also best
viewed when the lens is pulled out.
2. You will hear a click when the lens is fully in position.
Push in to collapse the lens
1.6.

Mounting in Portrait Position

This display can be installed in portrait position. Rotate 90 degrees clockwise from the back side of the display. The terminals will be on the left and
bottom sides of the user from the back of the display.
10 mm
10 mm
10 mm
3
10 mm
Push out to extend the lens
Simplicity Series