Monitor Out Connection; Connecting Headphones; Monitor Out Connections - Planar PD520 Owner's Operating Manual

MONITOR OUT
Connection

Connecting Headphones

The PD520 has stereo audio and Composite video outputs for connecting to a
➤
second VCR or other auxiliary equipment. Connect the Monitor-OUT audio and
video jacks to the audio and video inputs of the VCR or other equipment as
shown in Figure 3-5.
You can route either the main or picture-in-picture (PIP) source signal to this
output. For more information, refer to Monitor Out on page 36.
Note
Monitor-OUT
INPUT1
Figure 3-5. MONITOR OUT Connections
You can connect a set of headphones to the PD520 to watch a program
➤
without disturbing others. Connect them to the headphone output located at
INPUT2; see Figure 3-6.
INPUT2
R
Audio
L
VIDEO
S-VIDEO
Figure 3-6. Connecting Headphones
The audio output level is fixed. (The volume and mute
controls affect only the speaker and headphone outputs.)
Camcorder
A/V Receiver
20
VCR
Planar PD520 Owner's Operating Manual