Figure 2-1 shows the locations of the PD520 controls and indicators.
Figure 2-1. PD520 Controls and Indicators
1. AV Button (Input Source Selection)
To select a source, press the AV button (with no menus visible on-screen).
Use the
or
button (see below) to highlight the desired input source and
press AV again.
When a menu is visible on-screen, this button operates identically to the
ENTER button on the PD520 remote control unit (refer to PD520 Remote
Control on page 9).
2. MENU Selection Button
Press this button to access the on-screen display (OSD) controls, or to exit
the current menu and return to the previous one.
Planar PD520 Owner's Operating Manual
2.
7
6
5
Controls and Functions
Right Side
1
AV
2
MENU
+
VOL
3
–
4
5
2.1
PD520 at a Glance
Controls and Indicators