Advertisement
N421
install
8. Level the scale
Level the scale by turning the scale
feet until the levelling bubble is centred
and the scale does not wobble.
9. Connect the meter cable to the postage meter
If using a postage meter, connect the
large end of the meter cable to the the
meter as shown. Tighten the
thumbscrews securely.
B900
B900
B700
10.Plug power supply unit into outlet
Plug the power supply unit into the wall
outlet and turn power on. After a short
power-up sequence, the display appears
as shown.
Note: If the scale does not power-up, check that the power cable is firmly attached
to the scale. Also check that the wall outlet you are using has power by plugging in
another device.
Page 4
Adjustable
Feet (4)
DM series
Installation Instructions
If your postage meter is fitted with an
optional Datalink unit, connect the
large end of the meter cable to the
lower connector on the Datalink unit.
Tighten the thumbscrews securely.
Bubble
must be
in centre.
Datalink
Advertisement
